Nanoparticle meta-grid for enhanced light extraction from light-emitting devices – Phys.org
Click here to sign in with or
Forget Password?
Learn more
share this!
123
27
Share
Email
July 31, 2020 feature
by Thamarasee Jeewandara , Phys.org
A tailored layer of plasmonic nanoparticles can be introduced into the epoxy casing of a light-emitting diode (LED) to improve the device’s light output, to benefit energy savings and boost the LED lifetime. In a new report on Nature Light: Science & Applications, Debrata Sikdar and a team of scientists in chemistry, electronics and physics at the Imperial College London and the Indian Institute of Technology, showed the benefits of including a two-dimensional (2-D) array of silver nanoparticles known as a ‘meta-grid’ to the lens shaped epoxy packaging. They tested their theory using computer simulations and demonstrated the ability to improve light extraction from the nanoparticle meta-grid based LED. The alternative approach can be customized to suit a specific color of emission, the authors proposed a few additional schemes to implement the strategy into the existing LED manufacturing technology.
Light-emitting diodes (LEDs) are ubiquitous in the modern-world, from traffic lights to electronic displays and in applications of water purification and decontamination. Since typical semiconductor LEDs are encapsulated by a transparent insulator that limits the efficiency of light extraction, researchers have attempted to enhance the light extraction efficiency of LEDs for improved light output. The chip-encapsulating material itself can be a limiting factor alongside Fresnel loss; i.e. when a significant amount of the incident light is reflected back from the interface into the chip. To mitigate such limits, researchers had introduced materials with higher refractive indices than epoxy or plastic, although the amends are yet difficult and economically unfavorable for mass production adaptation. Additional schemes have included nanoparticle-epoxy nanocomposites or engineered epoxy resins to ensure higher refractive indices without compromising transparency. However, a larger refractive index can again lead to a larger portion of the light being reflected back from the encapsulant/air interface to contribute to Fresnel loss.
An alternative route to improve light-extraction from LEDs
In this work, Sikdar et al. proposed minimal changes to the manufacturing process to reduce Fresnel loss at the chip/encapsulant interface by using a fixed photon escape cone to increase light transmission across the setup. To accomplish this, they placed a monolayer of sub-wavelength metallic nanoparticles (NPs) as a ‘meta-grid’ on top of a conventional LED chip within the chip’s usual encapsulating packaging. The resulting enhancement of LED light transmission occurred as a result of destructive interference between light reflected from the chip/epoxy interface and light reflected by the NP meta-grid. By reducing reflection from the chip/epoxy interface they increased the lifetime of the LED chip and minimized waste heat.
To demonstrate nanoparticle-assisted enhanced transmission, they used silver nanospheres as strong plasmonic resonators, with minimal absorption loss. The team studied the roles of the NP radius, interparticle gaps formed by the nanospheres during bottom-up assembly in to a two-dimensional (2-D) hexagonal array and the influence of nanoparticle (NP) height. To calculate the light transmittance, Sikdar et al. used a light emitter and detector placed inside the chip and the encapsulating medium, respectively. Diverse sets of NP arrays provided maximum enhancement in light transmission across different spectral windows and therefore the ‘meta-grid’ could be optimized for each LED relative to its emission spectral range.
Optimizing the nanoparticle meta-grid
The team then maximized transmittance across a specific spectral range using an optimized structure of the meta-grid. The scientists observed enhanced light transmission with the setup, and credited the outcome to the Fabry-Perot effect between the chip/encapsulant interface and NP meta-grid. The transmission dip, also known as the extinction peak, depended on the height, gap, and other parameters of meta-grid NPs, and illustrated the underlying physics of the device. As a result, by varying the gap and height of the nanoparticle meta-grid and radius of the constituent silver nanoparticles, the scientists influenced the transmission dip or extinction peak during LED emission.
Furthermore, light reflected from the chip/encapsulant interface distinctly interfered with light reflected from the NP array, to effectively reduce reflection from the setup and increase transmission due to Fabry-Perot effect based transmission enhancement. The chip/encapsulant interface and NP meta-grid acted as two reflective surfaces to form the cavity in between them. The team placed the meta-grid at the closest possible height to the chip/encapsulant interface to optimize its position and restrict any leakage of radiation. They also showed how the small NPs exhibited better angle-averaged transmittance for unpolarized light.
Light transmission in the NP meta-grid
The scientists obtained enhanced transmission in the presence of the optimized meta-grid, which was significantly greater than that obtained without NPs across the same range of wavelengths. The maximum transmittance of the system was sensitive to any imperfections in the fabrication process. They precisely tuned and adjusted the meta-grid of nanoparticles on the LED chip for optimal performance. The resulting NP meta-grid allowed a 96 percent increase in light transmission (which is otherwise 84 percent) from the emissive layer to the encapsulant layer.
In this way, Debrata Sikdar and colleagues proposed a scheme to significantly enhance light extraction from LEDs by boosting the transmission across the chip/encapsulant interface. They accomplished this by introducing a monolayer of plasmonic nanoparticles (NPs) on top of the LED chip to reduce Fresnel loss and enhancing light transmission originating from the Fabry-Perot effect. The team propose implementing the scheme either by itself or in combination with other available strategies to enhance the LED efficiency.
More information: 1. Sikdar D. et al. Nanoparticle meta-grid for enhanced light extraction from light-emitting devices, Light: Science & Applications, doi.org/10.1038/s41377-020-00357-w
2. Lal S. et al. Nano-optics from sensing to waveguiding, Nature Photonics, doi.org/10.1038/nphoton.2007.223
3. Sikdar D. & Kornyshev A. A., An electro-tunable Fabry–Perot interferometer based on dual mirror-on-mirror nanoplasmonic metamaterials. Nanophotonics, doi.org/10.1515/nanoph-2019-0317
Journal information: Light: Science & Applications , Nature Photonics
© 2020 Science X Network
Explore further
Facebook
Twitter
Email
Feedback to editors
4 hours ago
0
5 hours ago
0
8 hours ago
0
May 30, 2024
0
May 30, 2024
1
27 minutes ago
34 minutes ago
1 hour ago
1 hour ago
2 hours ago
2 hours ago
2 hours ago
2 hours ago
2 hours ago
2 hours ago
May 29, 2024
May 22, 2024
May 17, 2024
May 14, 2024
May 12, 2024
May 10, 2024
More from Optics
Jul 29, 2020
Jul 6, 2020
Jul 6, 2020
Jul 3, 2020
Mar 29, 2019
Nov 11, 2013
1 hour ago
May 27, 2024
May 23, 2024
May 23, 2024
May 23, 2024
May 22, 2024
Use this form if you have come across a typo, inaccuracy or would like to send an edit request for the content on this page. For general inquiries, please use our contact form. For general feedback, use the public comments section below (please adhere to guidelines).
Please select the most appropriate category to facilitate processing of your request
Thank you for taking time to provide your feedback to the editors.
Your feedback is important to us. However, we do not guarantee individual replies due to the high volume of messages.
Your email address is used only to let the recipient know who sent the email. Neither your address nor the recipient’s address will be used for any other purpose. The information you enter will appear in your e-mail message and is not retained by Phys.org in any form.
Get weekly and/or daily updates delivered to your inbox. You can unsubscribe at any time and we’ll never share your details to third parties.
More information Privacy policy
We keep our content available to everyone. Consider supporting Science X’s mission by getting a premium account.
Medical research advances and health news
The latest engineering, electronics and technology advances
The most comprehensive sci-tech news coverage on the web
